+971 54 447 5160 Get a quote
Epoxy Flooring · Dubai

Resin floors that bond because the slab was tested.

Epoxy and polyurethane floors for garages, plant rooms, kitchens and warehouses — ground back and moisture-tested first, because resin fails on damp concrete no matter how well it is applied.

  • Slab moisture-tested before quoting
  • Mechanically ground, never just cleaned
  • System chosen for the actual traffic
Epoxy & Resin Flooring — Xpert Hands at work in Dubai
Slab prepared by grinding before resin is applied
LicensedDED trade licence, Dubai
PriorityUrgent faults first
7 days08:00–20:00
In a hurry? We'll call you back.
Four short fields, then a real person — within fifteen minutes during the day.
Thank you — a specialist will call you within 15 minutes during the day.
When to call us

Signs a resin floor is failing.

Resin floors give clear warnings, and most of them point at preparation or moisture rather than the coating itself.

Coating peeling in sheets

Bond failure — moisture beneath or inadequate mechanical preparation. Recoating over it will fail the same way.

Blisters or bubbles in the surface

Vapour pressure from a damp slab pushing upward. The slab needs addressing, not the topcoat.

Yellowing or chalking in sunlight

Standard epoxy under UV. Predictable, and solved with a polyurethane topcoat.

Cracks telegraphing through the finish

Slab movement coated over. Joints and cracks need treating before, not sealing under.

Floor slippery when wet

No anti-slip aggregate, or it has worn. Correctable with a new topcoat graded for the use.

Edges lifting at the wall line

Missing coving and standing water at the junction working into the system.

Worn tracks where traffic runs

System too light for the actual traffic. The specification, not the application, was wrong.

Staining that will not clean off

Chemical attack on a system not rated for what is being spilled on it.

What's included

Every visit, to the same written standard.

01
Moisture testing

The slab checked for residual moisture before anything is quoted — the single most common cause of resin failure.

02
Mechanical preparation

Diamond grinding or shot blasting to open the surface, because resin bonds to profile, not to a clean floor.

03
Crack and joint repair

Cracks cut, filled and bridged, and movement joints carried through rather than coated over.

04
Primer matched to substrate

Including damp-tolerant primers where the slab needs them, specified from the test result.

05
System built for the use

Self-levelling, flake broadcast or heavy-duty PU chosen for the traffic, chemicals and temperature.

06
Anti-slip where it matters

Aggregate graded into the topcoat for wet areas and ramps, balanced against cleanability.

07
Coving and drainage detail

Coved upstands and falls to gullies in kitchens and plant rooms, so washing down works properly.

08
Written work summary

The system, the coats applied and the preparation method, recorded in writing.

Epoxy & Resin Flooring — Xpert Hands, Dubai
Epoxy & Resin Flooring — Xpert Hands, Dubai
Epoxy & Resin Flooring — Xpert Hands, Dubai
Our standard

Epoxy & Resin Flooring, the Xpert Hands way.

Resin flooring is a preparation trade wearing a coatings costume. Where it peels, blisters or lifts in sheets, the cause is almost always a slab that was damp, or polished rather than ground.

So we test moisture and grind mechanically before quoting a finish, and we say no to floors that are not ready rather than take the job and the blame.

Every job is quoted in writing before work starts and documented in writing when it's done. One accountable team, one number, from first visit to final sign-off.

In practice that means the scope of work, the date and the number to call are printed on your invoice. No debate about what was agreed — the document in your hand is the record. Paperwork sounds unglamorous, but it is what accountability actually looks like: what we quoted, what we did, and how to reach us, all in writing.

How it works

Four steps. No surprises at any of them.

01Test and assess

Slab moisture, existing coatings, cracks and how the floor is actually used.

02Specify

The system, the finish, the slip rating and the downtime, written down before work begins.

03Prepare and apply

Grind, repair, prime and apply in coats, with cure times respected rather than compressed.

04Cure and hand over

Cured before traffic returns, with cleaning and aftercare explained.

Get a quote

Tell us what you need. Properly.

The more you tell us, the more precise your quote — and the fewer questions we need to ask when we call. Photographs are welcome; so is a one-line summary if that's all you have time for.

How we handle your details is set out in our privacy notice. A specialist replies within fifteen minutes during the day, and first thing in the morning if you write overnight. Genuinely urgent? Call between 08:00 and 20:00 — that reaches someone straight away.

  • Fixed quote before any work is booked
  • No call-out charge for quoting
  • Written summary of every completed job

What happens after you press send: your request lands with our booking team, not a call centre queue. A specialist who actually knows this work reads the details, checks them against your photographs and notes, and either prepares a written quote — itemised, fixed, and valid whether you book this week or next month — or, where the job needs a look first, arranges a visit and quotes after it. If anything is unclear they ask before quoting, not after arriving. You'll hear from us by phone or WhatsApp within fifteen minutes during the day. Messages that arrive overnight are answered first thing in the morning. There is no obligation at any point: many clients use the quote to sanity-check another provider's price, and we're comfortable being the benchmark.

Plan your epoxy floors visit

Three short steps · no obligation

What can we help with?

Pick everything that applies — it decides who we send and what comes on the van.
What do you need? — everything that applies
How urgent is it?

Received. A specialist is on it.

Expect a call or WhatsApp within fifteen minutes during the day, with a written quote, or a visit arranged first if the job needs one.

Message us meanwhile
Reply within 15 minutes, 08:00–20:00 Fixed quote before work No obligation
Our promise

Senior people on every job — and every commitment in writing.

We won't show you invented star ratings. What we'll show you instead: a fixed quote before work starts, a documented visit you hold in writing, and specialists who put their name on the job. Everything we agree is on paper — not our word for it.

Appointed maintenance partner to Seemleius Mobility — caring for relocated families' homes from day one. A partnership you can verify, not a badge we bought.

Prefer that we call you?

Leave your details. A specialist — not a call centre — phones you back.

Noted — we'll call you shortly.
Where we work

Across Dubai, daily

JumeirahEmirates HillsArabian RanchesDubai HillsPalm JumeirahDubai MarinaDowntownBusiness BayJVCMirdifAl BarshaDeira

We work across Dubai, from the Palm to Mirdif. If your community isn't listed, call anyway — the list shows where we work most, not the limit of where we go.

Annual plans

For villas and commercial premises

For villas and commercial premises we run annual maintenance contracts with scheduled visits and priority response. Ask for an AMC proposal with your quote and we'll price both.

Ask for AMC pricing with your quote

Worth knowing

Resin floors: what decides success.

Moisture in the slab beats every product

Concrete holds water, and a sealed resin layer gives it nowhere to go. The vapour pressure that builds underneath will lift even a well-applied coating, in sheets.

A moisture test takes minutes. Skipping it is why some floors fail within months while the same product elsewhere lasts for years.

Preparation means grinding, not cleaning

Resin bonds mechanically, into the profile opened up by diamond grinding or shot blasting. A floor that has merely been washed, or acid-etched, has no key for the coating to hold.

If a quote does not describe how the slab will be prepared, it is not a quote for a floor that lasts.

The system should match the abuse

A villa garage, a commercial kitchen and a warehouse aisle punish a floor in completely different ways — point loads, hot water and chemicals, or constant wheeled traffic.

One product does not serve all three. Specifying by use rather than by habit is most of the decision.

UV and epoxy are not friends

In sustained sun, standard epoxy yellows and chalks. It is a cosmetic failure rather than a structural one, but it is very visible and entirely predictable.

Outdoors and in bright rooflit spaces, a polyurethane topcoat holds colour. It costs more and it is the right answer.

Details decide whether it can be cleaned

Coved upstands at walls, correct falls to gullies and sealed junctions are what make a kitchen or plant room floor washable rather than merely coated.

Without them, water sits at the wall line and works into the edge of the system — which is where resin floors usually start to fail.

Epoxy & Resin Flooring in Dubai
Before you ask

Straight answers to the usual questions.

These are the questions our booking team hears most, answered the way we'd answer them on the phone. If yours isn't here, the fastest route is WhatsApp — between 08:00 and 20:00 a specialist replies within minutes, and you'll get a straight answer rather than a sales script. Nothing below is small print; everything stated here is what the written quote and the invoice will say too, because a company that answers plainly before the job is far more likely to behave plainly during it.

Why did my last epoxy floor peel?
Nearly always one of two things: moisture in the slab pushing the coating off from beneath, or preparation by cleaning and acid rather than mechanical grinding. Both are avoidable, and both need addressing before recoating.
Can you epoxy over an existing coating?
Sometimes, if it is sound and compatible — we test adhesion first. Where the old system is failing, it comes off. Coating over a loose floor simply adds weight to something already letting go.
Is epoxy suitable outdoors?
Straight epoxy ambers and chalks in sustained UV, so for terraces and exposed areas we use a polyurethane topcoat or a PU system. Anyone offering plain epoxy for a sunlit terrace is setting you up for a colour complaint.
How long before I can use the floor?
Cure times are fixed by chemistry and temperature, and rushing them is how floors get marked permanently. You get the schedule in writing so you can plan around the downtime honestly.
Can you make it non-slip for a kitchen?
Yes — graded aggregate in the topcoat, matched to how the floor is cleaned. There is a genuine trade-off between grip and ease of cleaning, and we will talk you through where to land on it.
For business

Managing property, not just living in one?

Offices, retail, F&B, clinics and residential buildings run on different terms: response times you can hold us to, one account manager across every site, and documentation your inspections will ask for.

  • A written SLA with response times by severity
  • One named account manager across all your sites
  • Consolidated monthly invoicing and reporting
  • Quarterly reviews against the numbers, not anecdotes
How commercial works
Site survey firstWe walk the premises and review the assets before anything is priced.
Proposal in writingScope, schedule, SLA and price — itemised so you can compare it line by line.
Priority responseContract sites are reached first, ahead of all other work.
Seven days a week

Ready when you are.

Tell us what the property needs. A specialist replies within fifteen minutes during the day, with a fixed quote in writing or a visit first if the job needs one.